Layer 3 Switch And Why Your Network Need It

Posted on: April 12, 2020, by :

What is a layer 3 switch and why would your network need it?

In today’s complex enterprise networks comprising many subnets and virtual LANs, a layer 3 switch plays an important role in many systems. But do you need this in your network? Let’s see.

What is a layer 3 switch?

Simply put, a layer 3 switch combines the functionality of a switch and a router. It acts as a switch to connect devices that are on the same subnet or virtual LAN at lightning speeds and has IP routing intelligence built into it to double up as a router. It can support routing protocols, inspect incoming packets, and can even make routing decisions based on the source and destination addresses. This is how a layer 3 switch acts as both a switch and a router.

Often referred to as a multilayer switch, a layer 3 switch adds a ton of flexibility to a network.

Features of a layer 3 switch

The features of a layer 3 switch are:

  • Comes with 24 Ethernet ports, but no WAN interface.
  • Acts as a switch to connect devices within the same subnet.
  • Switching algorithm is simple and is the same for most routed protocols.
  • Performs on two OSI layers— layer 2 and layer 3.

Purpose of a layer 3 switch

There is a ton of confusion about the use of a layer 3 switch because in a traditional setup, routers operate at layer 3 of the OSI model while switches operate at layer 2. So, how does this layer 3 switch fit into this model? Also, the name “layer 3 switch” causes confusion because switches typically operate from layer 2.

Originally, layer 3 switches were conceived to improve routing performance on large networks, especially corporate intranets. To understand the purpose, let’s step back a bit in time to see how these switches evolved.

Layer 2 switcheswork well when there is low to medium traffic in VLANs. But these switches would hang when traffic increased. So, it became necessary to augment layer 2’s functionality.

One option was to use a router instead of a switch, but then routers are slower than switches, so this could lead to slower performance.

To overcome this downside, researchers thought about implementing a router within a switch. Though technically feasible, it was not the ideal option because layer 2 switches operate only on the Ethernet MAC frame while layer 3 handles multiple routing protocols.

Read More: Top 68 CCNA Interview Questions With Best Answers

Researchers felt this was too complicated, so they came up with the idea of a layer 3 switches that acted as routers with fast forwarding done through the underlying hardware.

This is why the main difference between layer 3 switches and routers lies in the hardware. If you were to take a peek into a layer 3 switch’s hardware, you’ll see a mix of traditional switches and routers, except that the routers’ software logic is replaced with integrated circuit hardware to improve performance.


Also, a layer 3 switch’s router will not have WAN ports and other WAN features you’ll typically see in a traditional router.

Benefits of a layer 3 switch

From the above discussion, the purpose/benefits of a layer 3 switch are to:

  • Support routing between virtual LANs.
  • Improve fault isolation.
  • Simplify security management.
  • Reduce broadcast traffic volumes.
  • Ease the configuration process for VLANs, as a separate router isn’t required between each VLAN.
  • Separate routing tables, and as a result, segregate traffic better.
  • Simplify troubleshooting as, fixing problems in L2 layer is tedious and time-consuming.
  • Support flow accounting and high-speed scalability.
  • Lower network latency as a packet doesn’t have to make extra hops to go through a router.

Now that you know why your organization needs a layer 3 switch, let’s also look at the potential problems that come with it.

graphics design training in lagos

We have over 15,628 DOWNLOAD of this E-Book on our site from different individual in IT Field and Discipline. Discover how we can help you too. 

Fill the form below and Get this E-Book for FREE.

Disadvantages of layer 3 switch

Just like any product, a layer 3 switch also comes with its own share of downsides. We’ll briefly look into each of these disadvantages to help you make the right decision.



Cost is one of the major downsides to a layer 3 switch. It costs much more than a traditional switch and configuring and administering these switches also requires more effort. So, an organization should be ready to spend extra resources to set up layer 3 switches.

Read More: How To Subnet A Class A Network With Ease


Limited application

Layer 3 switches are most applicable only for large intranet environments with many device subnets and traffic. Homes and small organizations do not need these switches.

Lack of WAN functionality

Lack of WAN functionality is another major disadvantage with layer 3 switches. This means you can’t do away with routers completely and you’ll need both routers and layer 3 switches for routing traffic within and outside your organization.


Multiple tenants and virtualization

When compared to layer 2 switching, layer 3 routing is relatively slower. This can be an issue when you want to span VLAN over multiple switches for supporting multiple tenants and virtualization.


Lack of flexibility

Since you’re routing at the access layer, VLANswill be local to that specific switch. In other words, one VLAN will be associated with one switch and can’t be used on other switches. This limitation means you have to plan well to avoid one LAN from using multiple switches.

Read More: 5 Things You Should Know About IP Subnetting

 Do you need it?

Now comes the big question: Do you need a layer 3 switch at all for your network? Well, it depends on your network configuration and its size.

Generally speaking, you need a layer 3 switch if you answer yes to any of the below questions.

  • Do you have VLANs in your network? Are you planning to include them in the near future?
  • Do individual departments need separate broadcast domains for security and performance?
  • Do you have subnets connected through a router?
  • Does your network have more than 250 devices connected to the same VLAN?

If you answered yes to one or more of the above questions, you sure need a layer 3 switch for improved performance. In all other cases, it is optional.

Layer 3 switches act as both switches and routers. They are ideal for VLANs only, as they do not have a WAN interface. But within VLANs, it gives you multiple options to manage your bandwidth efficiently. This is why layer 3 switches are a powerful and scalable technology for building high-performance Ethernets.

1 thought on “Layer 3 Switch And Why Your Network Need It

Leave a Reply

Your email address will not be published. Required fields are marked *